I.Precautions #
Due to extended transportation time, the dropper seat post may remain in a compressed, inactive state. For first-time use, it’s necessary to manually activate the internal hydraulic cylinder of the dropper seat post to ensure smooth operation.
II.Dropper Seat Post Activation Method #
(1).Press and hold the control button with your left hand, while using your right hand to apply upward force on the seat, as shown in Figure 1. Once the dropper seat post reaches the designated position, you can release the control button, as shown in Figure 2.
(2).When the saddle is raised to its highest position, press and hold the dropper switch with your left hand while pressing down on the saddle with your right hand, as shown in Figure 1. Once the dropper seat post compresses to the specified position, you can release the switch, as shown in Figure 2.
(3).Repeat steps 1 and 2 two to three times. Afterward, pressing the dropper switch will allow the saddle to rise smoothly on its own, as shown in the image below.
III.Instructions for Use #
(1).When not seated on the saddle, press the switch to allow the saddle to automatically rise. While seated, pressing the switch will lower the saddle. This allows you to adjust the saddle height freely according to your preference during riding.
(2).If you haven’t used the saddle for an extended period, repeat steps 1 and 2 of the activation method to ensure the dropper post switch functions smoothly.
