I.Preparation #
Prepare a pump with a pressure gauge. (As shown in the image below)
II.Precautions #
1、The air valve for the front fork is located on the left side of the fork. The arrow points to the location. (As shown in the image below)
2、Check the front fork valve for any debris or blockages. (As shown in the image below)
III.Three, Steps for Inflating the Front Fork #
2、Rotate in the direction of the arrow to connect the pump nozzle to the front fork valve. (As shown in the image)
3、Begin inflating slowly while monitoring the air pressure value on the pump. (As shown in the image) The recommended front fork air pressure is indicated on the inner side of the left fork leg. (As shown in the image)
4、Once the desired air pressure is reached, disconnect the pump and securely tighten the front fork valve cap.
IV.Post-Inflation Check: #
1、Check for any air leaks in the front fork.
2、Gently press the front fork to ensure it rebounds properly.
3、Conduct a riding test to verify that the front fork’s suspension performance meets expectations.
